ÖloFMesh stainless steel filter cartridges are for use in a wide range of applications and industries, suitable for use in both liquids and gases.
All ÖloFMesh cartridges are manufactured from 316L stainless steel throughout. They are available in both plain cylindrical and pleated configurations, using the very latest in high specification medias. The plain cylindrical design provides a simple sleeve of filter medium supported by a central core. The pleated design uses pleated media, again supported by the central support core, this time providing over twice the effective filtration area of the cylindrical cartridge. In both designs, the construction method used is the latest ultra clean TiG and plasma welding system. This method of construction guarantees cartridge integrity, eliminating the risk of bypass and the presence of extractables derived from any bonding agents.
Features
- ÖloFMesh cartridges are available with many standard industrial end cap configurations and seal materials.
- They are available with optional outer guards for reverse flow or backwashing to enhance their superior robust design.
- The method of construction and materials used allow for use from -150°C to +300°C and up to 25 bar differential pressure in normal flow direction.
- All 316L stainless steel construction for wide chemical resistance.
- Individually marked with full product code.
- Choice of precision woven wire, sintered powder media and sintered metal fiber media.
- Wide range of ratings from 3μm through to 840μm.
- TiG welded construction for all grades.
- Full material traceability.
- Suitable for use from - 150°C to 300°C.
- No adhesives or bonding agents used.
Industries and Applications
Food and Beverage: Bottled water, Beers, Wines, Flavors.
Pharmaceuticals: Membrane pre-filtration.
Fine Chemicals: Polymers, Acids, Bases, Solvents.
Cosmetics: Alcohol, Creams, Lotions, Waxes, Oil based solution.
Water Treatment: Potable water, Resin trap, Pre UV, Membrane protection.
Automotive: Blanking wash oils, Top Coats, Hydraulic fluids, Solvent wash.
Petrochemicals: Amine stream, Glycol solutions, Water injection.
Construction
Modular assembly up to 745mm (30”) long 316L stainless steel TiG welded for ultra clean assembly.
- SS Grade - Nominal rated Precision woven mesh, available 5 – 840μm.
- SF Grade - Absolute rated Sintered metal fiber, available 3 – 60μm.
- SP Grade - Sintered powder media, available 6-60μm.
- Optional backwash cage for enhanced mechanical strength.
Dimensions
Modular assembly up to 745mm (30”) long 316L stainless steel TiG welded for ultra clean assembly.
- Outside Diameter: 66 mm.
- Core Diameter: 27 mm.
- Typical Surface Area (Per 10”):
- Cylindrical: 0.05 m2
- Pleated: 0.13 m2
- Length: See ordering guide.
Maximum Operating Conditions
- Temperature: 300 º C.
- Recommended maximum
differential pressure:- Forward Flow
- Cylindrical: 15 bar
- Pleated: 25 bar
- Reverse Flow
- 3 Bar with backflush support
- Forward Flow
Ordering Guide
010- 10 μm
015- 15μm
020- 20μm
025- 25μm
040- 40μm
070- 70μm
100- 100μm
250- 250μm
450- 450μm
840- 840μm
005- 5 μm
010- 10μm
015- 15μm
020- 20μm
030- 30μm
040- 40μm
060- 60μm
010- 10μm
015- 15μm
030- 30μm
060- 60μm
