ÖlofDepth Absolute Rate Melt Blown Filter Cartridges are constructed by an innovative design that utilizes flow pattern progressively from exterior surface to interior center. This design provides significant service life while maintaining consistent filtration efficiency. Manufactured with a truly graded density, the cartridges exhibit absolute rate at 99.9% and exceptional dirt holding capacity.

Features

  • Absolute rate at 99.9% efficiency (Beta Ratio: 1000) with micron ratings from 1 μm to 100 μm.
  • Continuously gradient pore construction increases dirt holding capacity.
  • 100% polypropylene depth filter cartridges for broad chemical compatibility.
  • Free of binders, additives and lubricants.
  • Manufactured by FDA grade polypropylene resin.
ÖlofDeep OARMB Series

Standard applications

  • Plating Solutions
  • Pre RO/DI
  • Chemicals
  • Petrochemical Process
  • Food & Beverage
  • Electronic

Operational Data

  • Maximum operating temperature : 60°C (140°F)
  • Maximum differential pressure : 4.0 bar at 20°C (58 psi @ 80°F)
    • 2.0 bar at 60°C (29 psi @ 140°F)
    • 1.0 bar at 60°C (14 psi @ 140°F)
  • Recommended change out
    • Differential pressure : 2 bar (29 psi)
  • Inside diameter: 1.1” (28mm)
  • Outside diameter: 2.5” (63mm)
ÖlofPleat HF Series

Ordering Guide

Media
PP – Polypropylene
Rating (μm)
1 ‐ 1μm
3 - 3μm
5 ‐ 5μm
10 ‐ 10μm
25 ‐ 25μm
50 ‐ 50μm
75 ‐ 75μm
100 - 100μm
Length (inch-mm)
09.8” – 248
10” – 250
10.1” – 254
19.5” – 495
19.8” – 500
20” – 508
29.5” – 750
30” – 762
40” – 1016
Other customized sizes
End caps
0: Flat Gasket Double Open End
5: 2-222 O-ring with Flat End
6: 2-226 O-ring with Flat End
8:2-222 O-ring with Fin
9: 2-226 O-ring with Fin
Gasket
S-Silicone
E-EPDM
V-Viton
W-Teflon encapsulated Viton
Option
C - PP Core
W - Patterned Surface
CW - PP Core + Patterned Surface
EX - Extended PP Core

Related Products