The ÖloFPleat ME Series dry gas filter cartridges are high efficiency filter elements specifically designed for the removal of solid particulate contaminants in critical applications. They are available in various grades of absolute rated high performance polyester media with hardware customizable to suit your application. These ultra high surface area pleated cartridges are completely customizable and designed to provide the optimum combination of particle removal efficiency and contaminant holding capability. The Ölof Model ME is mechanically bound with robust tin plated steel end caps and components designed specifically for the demands of the oil and gas industry. The filtering media is then attached to the end caps and core via a highly resistant adhesive to prevent any possibility of by-pass. Finally, tin plated steel outer cartridge encasements are designed to protect the pleat integrity against erosion caused by high flow rates assuring even flow and contaminant distribution across the effective surface area of the filter cartridge. By lowering saturated pressure drop this coalescing cartridge effectively reduce operating cost.
Features
- Provides highly rated efficiencies (to beta 5000) without compromising the element service life.
- Selected filtration media with exceptional contaminant holding properties, and low flow resistance.
- By lowering saturated pressure drop this coalescing cartridge effectively reduce operating cost.
- Wide array of rated fixed pore polyester filter medias specifically designed for the removal of solid particulate from a air or gas stream while maintaining cartridge structural integrity under very high air/gas flux rates.
- The ME Series element can be used even in under sized filter vessels with no visible increase to the equipment pressure drop.
- Economical service life and operator friendly.
- Fixed gasket design provides a positive sealing surface you can trust.
- Reduction of shut down state and operational costs.
- Overall the benefits of the ME high efficiency solids removal cartridge equates to total equipment and process protection.
Applications
- Gas processing facilities
- City Gates turbine meter protection
- Pre-filtration to sensitive high efficiency coalescing filters
- Formation protection during gas flooding
- Iron Sulfide Removal
- Downstream of a catalyst bed
- Heavy De-sanding applications
- General fine solids removal in critical air and gas related applications
Dimensions
- Length: 36"
- Outside Diameter: 4.5"
- Inside Diameter: 3.1"
Materials of Construction
Performance
- Standard Micron Rating: 1.0 μm.
- Recommended Initial ΔP <0.5 psid.
- Recommended Change-Out ΔP: 15 psid.
- Maximum Suggested Operating Life: 1 year.
- Minimum Operating Temperature: -60° F.
- Maximum Operating Temperature: 250°F.
- Burst Pressure: >75 psid.
