ÖlofDeep FP Filter Cartridges are constructed with four different pore diameter of spray nozzle which enables a "multi-layer" media. This Polypropylene structure is functioned with fine fibers in the inner layer and coarse fibers in the outer one which constitutes four different pore diameter in order to filtrate particles in different layers. This design has a high contaminant holding capacity, which also ensures a longer service life and a low pressure drop.

Features

  • Four layers structure cartridge, high contaminant holding capacity, longer filter service life.
  • 100% PP for compatibility with a wide range of process fluids.
  • Micro-Denier melt-blown filtration fiber, high removal ratings.
  • Formed by thermal bond without use of any binders and adhesives.
  • Certified by NSF42 and FDA CFR Title 21.
  • In compliance with the latest EC Directive for food contact.
ÖlofDeep AP Series

Standard applications

  • Filtration of etching and image development process solutions in PBC industry.
  • Filtration of electroplating fluids in conventional electroplating industry.
  • Pre-filtration of DI & RO water filtration system for industry usage.
  • Filtration of low viscosity chemical fluids.
  • Filtration of process water and recycled water.

Operational Data

  • Maximum operating temperature: 60°C
  • Maximum forward operating pressure:
    • 60°C: 1.8 kg/cm²
    • 20°C: 3.2 kg/cm²
  • RRecommended replacement pressure drop: 1.5 kg/cm²
Flow Layer Structure

Efficiency of Filtration

Efficiency of Filtration

Initial Pressure Drop

Initial Pressure Drop

Capacity of Dust

Initial Pressure Drop

Ordering Guide

Type
FP
Outer Diamter
C – 63mm
Inner Diameter
B – 28mm
Rating (μm)
0005 – 0.5μm
001 – 1μm
003 – 3μm
005 – 5μm
010 – 10μm
025 – 25μm
050 – 50μm
070 – 70μm
100 – 100μm
Length (inch)
0987 – 9,87"
10 – 10"
20 – 20"
30 – 30"
40 – 40"
End caps
Blank: Double Open
F: Double open & cap (DOE)
0: 222 with Flat End (SOE)
5:222 with Fin (SOE)
6:226 with Flat End (SOE)
7:226 with Fin (SOE)
O-ring Material
S-Silicone
E-EPDM
N – Buna N
A- PE (gasket only)
V-Viton
T-PFA encapsulated
Viton
Inner Core
P -Polypropylene

Related Products