OBFV & OMBE Series Carbon Steel Bag Vessels are designed to offer a high-quality and economical solution to applications that do not require stainless steel construction. The V-ring tubesheet design provides a positive snap-fit to ensure against by-pass.

OBFV Features

  • Carbon steel construction with epoxy-coated exterior
  • 150 PSI pressure rating
  • 2" NPT uni-style (side & bottom outlet) offers increased piping flexibility
  • Snap-fit V-ring bag seal design
  • Stainless steel perforated support baskets (9/64" perf. standard)
  • Adjustable tripod mounting/support leg assemblies
  • Easy-access eye-nut/swing-bolt closures with handle
  • Single O-ring seal (Buna-N standard)

OMBE Features

  • Carbon steel construction with epoxy-coated exterior 150 PSI pressure rating
  • RF Flanged "inline" inlet/outlet connections
  • Snap-fit V-ring bag seal design
  • Stainless steel perforated support baskets (9/64" perf. standard)
  • Permanent compression/hold-down plate
  • Heavy-duty welded angle mounting/support legs
  • Easy-access eye-nut/swing-bolt closure with bearing-assisted hand-wheel davit
  • Single O-ring seal (Buna-N standard)
Model
OBFV815
OBFV830
OMBE430
OMBE630
# of Bags
1
1
4
6
Bag size
1
2
2
2
Basket depth
15"
30"
30"
30"
EFA (ft²)
2.0
4.4
17.6
26.4
Max Flow Rate (GPM)*
90
200
600
1200
* Max flow rate is the maximum flow rate recommended through the vessel without a filter bag installed (using water). Any increase in viscosity and/or the installation of filter bags will reduce these flow rates significantly. Please refer to the sizing chart or consult with Ölof Filtration Teknologerna AB when sizing these vessels.
ÖlofHousing OBFV & OMBE Carbon Stl

OMBE Ordering Guide

# of Bags/Baskets
4
6
Basket Depth
30 – 30"
Inlet/Outlet Size
4F = 4" RF Flange
6F = 6" RF Flange
Inlet/Outlet
Blank = Inline
Material
C = Carbon Steel
Pressure Rating
S 15 = 150 PSI @ 250°F
Surface Finish
EC = Epoxy Coated (Ext)

OBFV Ordering Guide

Basket Depth
15 – 15"
30 – 30"
Inlet/Outlet Size
2N = 2" FNPT
Inlet/Outlet
3 = Uni-Style
Material
C = Carbon Steel
Pressure Rating
S 15 = 150 PSI @ 250°F
Surface Finish
EC = Epoxy Coated (Ext)

Related Products