OBFV82 Series Twin-Capacity Bag Vessels are designed to meet and/or exceed nearly all application requirements. The V-ring design provides a positive snap-fit to ensure against by-pass and deliver clean effluent. Vessels offer the flow and loading capacity of a multibag vessel at a more economical cost.
Features
- 304 & 316 stainless steel construction
- 150 PSI pressure rating standard
- Snap-fit V-ring bag seal design
- Single O-ring seal (Buna standard)
- Two identical GBFV830 vessels working in tandem
- Adjustable tripod mounting/support leg assemblies
- High flow rates and loading capacity at low pressure drops
- Stainless steel perforated support baskets (9/64" perf. standard)
- Two easy-access eye-nut/swing-bolt closures with single handle
- RF Flanged inlet/outlet connections (same side and opposite side options available)
Options
- ASME Code Stamp
- Electropolish
- Mesh-lined Baskets
- Alternate seal materials (EPDM, Viton, Silicone)
Flow Rate
Model
OBFV8230
Bag size
2
Basket depth
30
EFA (ft²)
8.8
Max Flow Rate (GPM)*
400
* Max flow rate is the maximum flow rate recommended through the vessel without a filter bag installed (using water). Any increase in viscosity and/or the installation of filter bags will reduce these flow rates significantly. Please refer to the sizing chart or consult with Ölof Filtration Teknologerna AB when sizing these vessels.
Ordering Guide
Basket Depth
12 = #4 Size
Inlet/Outlet Size
3 – 3"
4 – 4"
Inlet/Outlet Size
F = RF Flange
Outlet Configuration
2 = Opposite Side Outlet
5 = Same Side Outlet
Material
4 = 304 SS
6 = 316 SS
Pressure Rating
S 15 = 150 PSI @ 250°F
Surface Finish
GB = Glass Bead
EP = Electropolish
ASME Code Stamp
Blank = None
U = ASME
