Ölof Filtration Teknologerna AB has developed a Depth-Stack Filter Cartridges that are a new type of filter cartridge using depth filter sheets. It is designed using a double separator concept. The Separator design increases the total stability of the filter cartridges as the separators fully support the sheet material. This design also prevents filter sheet deformities after heat treatments and adverse effects of contact with hot sanitation. It is manufactured with rigid external clips to prevent damaging filter sheets during module loading and unloading while allowing for easy and reliable handling.

Features

  • Back washable, resulting in high total throughput.
  • Easy and reliable handling Rigid external clips prevent damage of the filter sheet during module loading and unloading.
  • No filter sheet deformities after heat treatment.
  • No adverse effects to filter sheets when in contact with hot sanitization or process filtration.
  • Increased filtration security Separator design increases the total stability of the filter cartridges as the separators fully　support the sheet material.
ÖlofDeep Lenticular Series

Standard applications

  • Particle Removal
  • Polishing Filtration
  • Final Filtration (germ removal)
  • Chill Haze Removal
  • Bottling Filtration
  • Clarifying Filtration
  • Filtration after Stabilization
  • Pre-filtration prior to Final Membrane Filters
  • Removal of Colloids

Specifications

  • Dimensions: Outside diameter: 8",12",16"
  • Material of Constructions: Depth filter sheet: Cellulose fibers, Natural diatomaceous earths, Perlite, Resins, etc.
  • Core/Separator: Polypropylene(PP)
  • Double O-ring or flat gasket: Silicone, EPDM, NBR, Teflon
  • Maximum Operating Temperature: 85 °C .
  • Recommended Max. Operating Pressure:2.4bar.
  • Sterilization: 121 °C @ 1.75 bar

Ordering information

Inner Diameter
B – 28mm
Construction
7 ‐ 7 cell
8 ‐ 8 cell
9 ‐ 9 cell
12 ‐ 12 cell
14 ‐ 14 cell
15 ‐ 15 cell
16 ‐ 16 cell
Rating
02 = 0.2 – 0.4μm
04 = 0.4 – 0.6μm
10 = 1 – 3μm
15 = 2 – 5μm
20 = 3 – 7μm
Connection types
S – Double
O-ring
C – Flat gasket
Seal
S - Silicone
EPD - EPDM
B - NBR
T- Teflon
Outer appearance
A – Small plate-shaped
B – Ring-shaped

Related Products