Ölof Filtration Teknologerna AB has developed a high performance PP Melt Blown Filter Cartridges that constructed from high-tech and precisely automatic controlled machines. The cartridges are 100% made of FDA grade polypropylene resin which is ideal for most general filtration requirements. The fiber matrix of the filter cartridge has been engineered to provide structural integrity throughout the long service life and stable pressure drop. Excellent character of non-fiber releasing provides optimum fluid purity and eliminates foaming.
Features
- 100% polypropylene construction provides excellent chemical compatibility with a variety of process fluids and applications.
- Graded pore construction provides optimum particle retention and prevents media migration, ensuring consistent filtration performance.
- Free of binders, additives and lubricants.
- Low pressure drop, high dirt holding capacity and long service life.
- Manufactured by FDA grade polypropylene resin.
Standard applications
- Food & Beverage
- Plating Solutions
- Pre RO/DI
- Chemicals
- Petrochemical Process
- Electronic
Operational Data
- Maximum operating temperature: 60°C (140°F)
- Maximum differential pressure:
- 3.0 bar at 27°C (43 psi at 80°F)
- 2.0 bar at 60°C (29 psi at 140°F)
- 1.0 bar at 60°C (14 psi at 140°F)
- Recommended Change Out differential Pressure:
- 1 bar (14 psi)
Ordering Guide
Media
PP – Polypropylene
Diameter ID/OD (mm)
Blank – 28mm/61mm
6C - 28mm/63mm
2C - 30mm/63mm
6D - 28mm/65mm
Other Customized Sizes
6C - 28mm/63mm
2C - 30mm/63mm
6D - 28mm/65mm
Other Customized Sizes
Rating (μm)
1 ‐ 1μm
5 ‐ 5μm
10 ‐ 10μm
25 ‐ 25μm
50 ‐ 50μm
75 ‐ 75μm
100 - 100μm
5 ‐ 5μm
10 ‐ 10μm
25 ‐ 25μm
50 ‐ 50μm
75 ‐ 75μm
100 - 100μm
Length (inch-mm)
05 – 127
06 – 152
063 – 160
098 – 248
10 – 250
101 – 254
195 – 495
198 – 500
20 – 508
292 – 743
295 – 750
30 – 762
39 – 990
393 – 1000
40 – 1016
50 – 1270
Other Customized Sizes
06 – 152
063 – 160
098 – 248
10 – 250
101 – 254
195 – 495
198 – 500
20 – 508
292 – 743
295 – 750
30 – 762
39 – 990
393 – 1000
40 – 1016
50 – 1270
Other Customized Sizes
End caps
0: Flat Gasket Double Open End
5: 2-222 O-ring with Flat End
6: 2-226 O-ring with Flat End
8:2-222 O-ring with Fin
9: 2-226 O-ring with Fin
5: 2-222 O-ring with Flat End
6: 2-226 O-ring with Flat End
8:2-222 O-ring with Fin
9: 2-226 O-ring with Fin
Gasket
S-Silicone
E-EPDM
V-Viton
W-Teflon encapsulated Viton
E-EPDM
V-Viton
W-Teflon encapsulated Viton
Option
C - PP Core
W - Patterned Surface
U - Grooved Surface
CW - PP Core + Patterned Surface
CU - PP Core + Grooved Surface
EX - Extended PP Core
W - Patterned Surface
U - Grooved Surface
CW - PP Core + Patterned Surface
CU - PP Core + Grooved Surface
EX - Extended PP Core
