ÖlofDepth Filter Cartridges are constructed with gradient pore diameter of spray nozzle which enables a "multi-layer" media. This Polypropylene structure is functioned with fine fibers in the inner layer and coarse fibers in the outer one which constitutes four different pore diameter in order to filtrate particles in different layers. This design has a high contaminant holding capacity, which also ensures a longer service life and a low pressure drop.

Features

  • Multi-layers structure cartridge, high contaminant holding capacity, longer filter service life.
  • 100% PP for compatibility with a wide range of process fluids.
  • Macro-Denier fiber provide rigid construction and longer cartridge life time.
  • Formed by thermal bond without use of any binders and adhesives.
  • Certified by NSF42 and FDA CFR Title 21.
  • In compliance with the latest EC Directive for food contact.
ÖlofDepth PP Series

Standard applications

  • Food & Beverage: Bottled Water, Flavored Water, sugar syrup, juices, etc.
  • Water Treatment: Membrane protection, Resin traps, production water.
  • Oil & Gas: Amine control, glycol, completion fluids, Pre-RO and Pre-DI water.
  • Other: High viscosity fluid, Paintings, galvanoplasthia.

Operational Data

  • Maximum temperature: 80°C
  • Maximum differential pressure: 20°C: 70 Psid (4.92 kg/cm²)
  • Recommended replacement pressure drop: 35 Psid (2.4 kg/cm²)

Efficiency of Filtration

Efficiency of Filtration

Initial Pressure Drop

Initial Pressure Drop

Ordering Guide

Type
OD
Rating (μm)
0005 – 0,5μm
001 – 1μm
003 - 3μm
005 – 5μm
010 - 10μm
020 – 20μm
025 - 25μm
050 – 50μm
075 – 75μm
100 – 100μm
150 – 150μm
Length (inch)
0987 – 9,87"
10 – 10"
20 – 20"
30 – 30"
40 – 40"
End caps
B: Double Open
F: Double open & cap (DOE)
0: 222 with Flat End (SOE)
5:222 with Fin (SOE)
6:226 with Flat End (SOE)
7:226 with Fin (SOE)
O-ring Material
S-Silicone E-EPDM N – Buna N A- PE (gasket only) V-Viton T-PFA encapsulated Viton
Inner Core
P -Polypropylene

Related Products