ÖloFGuard PP-ANF Series Manufactured with a true graded density, these elements exhibit a high void volume that results in low clean differential pressure losses and an excellent dirt holding capacity when compared to similarly rated elements. They are certified biosafe, non pyrogenic and fully validated for pharmaceutical and food applications.

Features

  • Superior dirt-holding capacity.
  • High Flow rates and long service life.
  • Broad chemical compatibility.
  • Low extractables and low protein binding.
  • Cartridges produced in a controlled environment
  • Manufactured according to ISO9001 certified
  • Quality Management System

Applications

  • Solvent Filtration.
  • Filtration for chemical intermediates
  • Pre-filtration for biologicals
  • DI and RO pretreatment
  • Pre-filtration of SVP & LVP
  • Primary process clarification
  • Filtration for viscous liquids

Specifications

  • Filter Media: PP
  • Support & Drainage : PP
  • Core, Cage: PP
  • Sealing Technology: Thermal Bonding, No Adhesives
ÖlofGuard PP-ANF Series

Technical Data

  • Maximum Differential Pressure:
    • Forward Flow: 4.2 bar @ 23°C; 1.5 bar @ 85°C
  • Flow Rate & Press. Drop (per 10” cartridge):
    • 3.0 μm ≥ 35 l/min @ 210 mbar
    • 5.0 μm ≥ 40 l/min @ 210 mbar
  • Filtration Area, ft²: ≥ 6.0 per 10" element.
  • Extractables (per 10” cartridge): ≤ 50 mg after 24 h soak in water
  • Bacterial Endotoxins: < 0.25 EU/ml as determined by the LAL test.
  • Sterilization: Support steam-in-place sterilization or autoclave at 123 °C.
ÖlofGuard PP-ANF Series

Ordering information

Rating (μm)
002 - 0.2
004 - 0.45
010 - 1.0
050- 5.0
Length
1 – 10"
2– 20"
3 – 30"
4 – 40"
End Cap
B - DOE
0 – 222 O-Ring /Flat End
5 – 226 O-Ring /Fin End
6 – 226 O-Ring /Flat End
7 - 226 O-Ring /Fin End
Gaskets / Seals
S – Silicone
E - EPDM
V - Viton

Related Products