OMBV Series Multi-Bag Vessels are designed for high flow and/or high contaminant load applications where clean effluent is critical. The V-ring design provides a positive snap-fit to ensure against by-pass.
Features
- Heavy-duty welded angle mounting/support legs
- RF Flanged "inline" inlet/outlet connections
- Bearing assisted hand-wheel closure davit
- Permanent compression/hold-down plate
- Stainless steel perforated support baskets (9/64" perf. standard)
- Easy-access eye-nut/swing-bolt closures
- 304 & 316 stainless steel construction
- Snap-fit V-ring bag seal design
- 150 PSI pressure rating
- Single o-ring seal (Buna-N standard)
Options
- ASME Code Stamp
- Mesh-lined Baskets
- Alternate Seal Materials (EPDM, Viton, Silicone)
Flow Rate
Model
OMBV430
OMBV630
OMBV830
OMBV1230
# of Bags
4
6
8
12
Bag size
2
2
2
2
Basket depth
30"
30"
30"
30"
EFA (ft²)
17.6
26.4
35.2
57.8
Max Flow Rate (GPM)*
600
1200
1600
2400
* Max flow rate is the maximum flow rate recommended through the vessel without a filter bag installed (using water). Any increase in viscosity and/or the installation of filter bags will reduce these flow rates significantly. Please refer to the sizing chart or consult with Ölof Filtration Teknologerna AB when sizing these vessels.
Ordering Guide
# of Bags/Baskets
4
6
8
12
Basket Depth
30 – 30"
Inlet/Outlet Size
4 – 4"
6 – 6"
8 – 8"
Inlet/Outlet
F = RF Flange
Material
4 = 304 SS
6 = 316 SS
Pressure Rating
S 15 = 150 PSI @ 250°F
Surface Finish
GB = Glass Bead
ASME Code Stamp
Blank = None
U = ASME
