ÖloFHousing VT Series is designed mainly for venting tanks applications and its available for 10 and 20 inches cartridges.
The inlet and outlet connection is suitable for direct mounting on the majority of storage vessels thanks to its Vee Clamp closing method of fast closure and ese change outs. This filter housings are ideal in those processes where the movement of clean air is critical. The design is to allocate ÖloFine M filters of hydrophobic PTFE membrane.
Features
- This filter housing is designed to accept the wide range of filter with code 7 fittings (O-ring 226) combined with double bayonet in the open end and a crossbow in the closed end.
- Filter ratings from 0.1 μm up to 40 μm for nominal lengths of 10 and 20 inches.
- Sanitary grade construction with electro polished finish.
- Single connection for inlet/outlet.
- Fast Open/Close thanks to its seal less Vee Clamp system.
- The dome is light and easy to remove.
- Has no loose internal elements for a hassle free operation.
Product specifications
- Construction materials:
- Body: Stainless Steel 316L
- Clamp opening: Stainless Steel 304
- Finish: Electropolished external surface
- Connections: inlet/out : 1-1/2’’ Tri Clamp
Operating conditions
- Maximum operating temperature: 110°C
Ordering Guide
Length
1 – 10"
2 – 20"
Connections E/S
1-1/2-1-1/2"
2-2"
Kind of connections E/S
C – BS4504 Flange PN16
H – ANSI Flange 150#
L- Tri clamp
M – DIN 11851 Coupling
N – RJTM Coupling
P – SMSM Coupling
R – IDFM Coupling
Finished
V - 0.8 Ra (interior) electropolished dome with internal chemical bath
Seal
N-None
