The ÖloFPleat HF Liquid Series are high flow capacity, high efficiency, inside to outside flow direction liquid filtration elements designed for applications with large flow requirements. They are available in various grades of absolute rated high performance cellulose, cotton, micro-fiberglass, polyester, and polypropylene media with hardware customizable to suit your application. The large diameter, large surface area pleated media cartridges are designed to provide the optimum combination of particle removal efficiency and contaminant holding capability.
This a pleated style technology supported with robust steel, nylon or polypropylene end caps. The filtering media is then attached to the caps and core via thermal bonding or a highly resistant adhesive to prevent any possibility of by-pass. Various options of outer cartridges encasements are also made available to protect the pleat integrity assuring even flow and contaminant distribution across the effective surface area of the filter cartridge.
Features
- Economics, quality, performance and reliability.
- Absolute rated efficiencies (to βeta 5000) without compromising the element service
life. - Filtrations media with exceptional holding properties, and low flow resistance.
- Operator friendly.
- The positive sealing of this cartridge does not require individual sealing assemblies.
- This large diameter filter can process higher flow rates with fewer elements allowing you to use fewer filters per housing.
- Reduced downtime during filter replacement.
- Wide variety of medias to suit each individual process
- Comes in 100% Polypropylene (incineration is an option for disposal)
The design is generally for applications with large rate of flows.
- Process water
- Waste water
- Pre-filtration to RO membranes
- Cooling water
- Utility water
In addition these elements are highly applicable in:
- Refining
- Chemical plants
- Pipeline fuels
- Amines
- Other mayor applications
- Standard micron rating: 0.5, 1, 2, 5, 10, 15, 20, 40, 50, 70, 100
- Recommended initial ΔP: <0.5 psid
- Recomm. Change-Out ΔP: 35 psid
- Min. operating temperature: - 60° F
- Max. perating ΔP: 75 psid
- Max. suggested oper. Life: 1 year
- Maximum Opr. Temperature Polypropylene: 180°F
- Maximum Opr. Temperature Polyester: 240°F
- Maximum Opr. Temperature micro-fiberglass: 300°F
- Maximum Opr. Temperature cotton: 300°F
- Maximum Opr. Temperature Cellulose: 300°F
- Maximum Opr. Temperature Nylon: 340°F
- Maximum Opr. Temperature Nomex: 400°F
- Lengths: 20”, 40”, 60”, 80”
- Outside diameter: 6”
- Inside diameter: 3”
- Flow direction: Inside to outside1
Materials of construction
| Components | Steel | Micro-fiberglass | Polypropylene | Polyester | Nylon | Nomex | Cotton | Cellulose | Buna, EPR, Viton |
|---|---|---|---|---|---|---|---|---|---|
| Pleated Media | X | X | X | X | X | X | X | ||
| Outer Support | X1 | X | X | X | |||||
| End Caps | X | X | X | X | |||||
| Center Core | X | X | |||||||
| Gasket | X2 | X | X |
